|SPEC. / MODEL.||UNIT||CS-230N|
● 75~230 █ 75~160
● 2.95~9.05 █ 2.95~6.3
Bar feed servo-5.8
|Blade Size||mm||Ø750 x Ø80 x T3.8|
|in||Ø29.52 x Ø3.15 x T0.15|
|Packing Size||cm||Requrie from Sales Person|
|Gross Weight||kg||Requrie from Sales Person|
|Blade Feed Cut||.||AC Servo motor and ball screw|
|Bar Feed||.||AC Servo motor and ball screw|
|Auto Feed Length||mm||20~600 Single feed /601~9999 Multiple feed|
|in||0.78~23.6 Single feed /23.6~393.6 Multiple feed|
|Auto Chip Conveyor||.||Chain belt chip conveyor (Opt.)|
|Cooling System||.||Air Compressed oil mist|
Enhance speed of feeding material from 12M/min to 24M/min, and cycle time is 50% less than before.
LESS CYCLE TIME
Enhance power of feeding and cutting with less feeding friction design achieving faster production with high reliability and repeatability accuracy.
Special design makes the butt length shorter: 50mm+cutting length (original 80mm+cutting length).
Ball screws with built-in anti-dust wiper system and splash-proof design, it doesn’t need flexible covers.
New built-in backlashless gear system without brake lining pads, without changing magnetic powder for brake system, it decreases maintenance cost significantly.
7" wide touch screen control is for easier operation, monitoring & error codes history monitoring.
Variable vise pressure can be easily adjusted & monitored in front of the machine.
LESS OPERATION TIME
Detecting material size automatically with less cycle time, less operation time and avoiding operating errors.
Trim cut ON/OFF function is available to choose for different requirement.
Unique gear head design with built-in backlashless gear system ensures smooth cutting, high efficiency, less noise, and, lower power consumption, faster cutting speed, and much longer saw blade service life.
Fiber photo sensors detect bar end of different kinds of materials such as extruded bars, forging bars etc. more accurately than before.
UP TO DATE DESIGN
UP TO DATE MODULE
Modularized oil mist spraying mode can be set as: 1. Intermittent spraying 2. Continuously spraying for optimized mist oil consumption. When the cutting oil is not enough, then error signal will pop-out to notify the operator to refill it.
Up to date POD program installation by USB port is for easier program uploading, downloading, and editing.
Independent, compact oil tank design could run the machine with good performance achieving environment-friendly, energy saving purpose.
|1. Sawblade||1 pc|
|2. Wire brush||2 pcs|
|3. Working lamp||1 set|
|4. Tools with box||1 set|
|5. Instruction manual||1 copy|
1. Auto chip conveyor.
2. Long cut-off unloading table.
3. Bar stock reservoir and loader.
4. Chain belt magazine table for flat work-piece.