Thread Rolling Machine

The Mega's economy thread/profile forming machine at the moment equipped with swivelable roller shafts. Which ensures optimum capacity and use in making threads and axially parallel profiles in the through-feed process. However, short cylindrical parts (especially thread pins) can also be rolled in the through-feed process. For this special through-feed process, automatic feed of the work is necessary.
This machine can also be used in the in-feed process with parallel die axes, the length of the profile to be rolled depends on the width of the rolling dies, there is no axial movement of the workpiece.



Range of Thread Max. diameter 
 Φ50 mm
Min. diameter
 Φ2 mm
 0.25-2 mm
Range of length
 5-50 mm
Range of length
Speed Range

5-60 RPM(Standard)

Rolling Dies Max. diameter  Φ100 mm
Bore diameter  Φ50.5 mm
Width range  50 mm
Key way  8 mm
Distance of Dies Spindle Max.diameter  150 mm
Min.diameter  100 mm
Max. Rolling Pressure  5 Tons
Main Power  2HP(1.5KW)
Hydraulic Power  2HP(1.5KW)
Coolant Power  1/8HP (0.09KW)
Height from Floor to Spindle Center  743 mm
Floor Space Required  1300L x 1150W mm
Over Height  1000 mm
Weight  Net weight  920 Kgs
Gross weight  1070 Kgs




1. Swivelable roller shafts at full utilization of the rolling force,short working cycles by increasing the forward-return speed.
2. Increase driving power, optional use in slow motion/normal and rapid advance by hydraulic multi-circuit system.
3. Increase in the efficiency and improvement of the utilization of power by gears on parallel axes and drive by universal shafts.
4. Free passage between the roller shafts for the manufacturing of any length of profiles.