TR-10T / TWO DIES ROLLING

Thread Rolling Machine

The Mega's economy thread/profile forming machine at the moment equipped with swivelable roller shafts. Which ensures optimum capacity and use in making threads and axially parallel profiles in the through-feed process. However, short cylindrical parts (especially thread pins) can also be rolled in the through-feed process. For this special through-feed process, automatic feed of the work is necessary.
This machine can also be used in the in-feed process with parallel die axes, the length of the profile to be rolled depends on the width of the rolling dies, there is no axial movement of the workpiece.

 

 

SPECIFICATIONS MODEL TR-10T
Range of Thread Max. diameter 
 Φ60 mm
Min. diameter
 Φ5 mm
Pitch
 0.6-2.5 mm
Range of length
(in-feed)
 5-70 mm
Range of length
(thru-feed)
 Free
Speed Range

5-60 RPM(Standard)

50-105 RPM(Optional)

Rolling Dies Max. diameter  Φ130 mm
Bore diameter  Φ54 mm
Width range  70 mm
Key way  10 mm
Distance of Dies Spindle Max.diameter  190 mm
Min.diameter  100 mm
Max. Rolling Pressure  10 Tons
Main Power  7.5HP(5.6KW)
Hydraulic Power  3HP(2.2KW)
Coolant Power  1/8HP (0.09KW)
Height from Floor to Spindle Center  820 mm
Floor Space Required  1300L x 1361W mm
Over Height  1050 mm
Weight  Net weight  1250 Kgs
Gross weight  1400 Kgs

 

 

 

1. Swivelable roller shafts at full utilization of the rolling force,short working cycles by increasing the forward-return speed.
2. Increase driving power, optional use in slow motion/normal and rapid advance by hydraulic multi-circuit system.
3. Increase in the efficiency and improvement of the utilization of power by gears on parallel axes and drive by universal shafts.
4. Free passage between the roller shafts for the manufacturing of any length of profiles.