CS-75N

FERROUS CUTTING

【MEGA】CS-75N_NC High-Speed Automatic Carbide Precision Circular Metal Sawing Machine: NC Series

Precision Circular Metal Sawing Machine: CS-75N_MEGA machine
Precision Circular Metal Sawing Machine: CS-75N_MEGA machine
  • Specification
    SPEC. / MODEL.UNITCS-75N
    Metal Sawing Capacitymm
      ● 10~75    █ 15~60 
    in
      ● 0.39~2.95   █ 0.6~2.36
    Motor OutputHP
     Circular Saw Blade-15/4P
     Hyd.-2
     Metal bar feed servo-1.33
     Servo feed rate-1.73
    Circular Saw Blade Sizemm Ø285 (280) * Ø32 * T2.0
    in Ø11.02 (Ø11.22) * Ø1.26 * T0.079
    Circular Saw Blade Speedrpm 56-225 Inverter Controlled Variable Speed
    Circular Saw Blade Feed Cut. AC Servo motor and ball screw
    Bar Feed. AC Servo motor and ball screw
    Auto Feed Lengthmm 6~600 Single feed /600~9,999 Multiple feed
    in 0.23~23.62 Single feed /23.62~393.6 Multiple feed
    Auto Chip Conveyor. Chain belt chip conveyor (Opt.)
    Cooling System. Air Compressed oil mist
    Packing Sizemm 2,290 * 2,240 * 2,130
    ft 7.51 * 7.35 * 6.99
    N.W / G.Wkg 2,460/2,950
    lb 5,423/6,503
    Magazine Table Dimensions
    Capacitymm Ø75 * 6,000 L * 13 pcs
    in Ø2.95 * 236.2 L * 13 pcs
    Sizemm 5,300 L * 1,600 W
    in 208.66 L * 63 W
  • Feature

    DOUBLE PRODUCTIVITY

    FAST FEEDING

    Enhance the speed of feeding metal material from 12 M/min to 24 M/min, and cycle time will be 50% less than before.

    LESS CYCLE TIME

    Enhance the power and precision of feeding and sawing with less feeding friction design, achieving faster production with high reliability and repeatability accuracy.

    SHORTER REMNANT

    Special design makes the butt length shorter: 50 mm+sawing length (original 80 mm+sawing length).

    SMART MAINTENANCE

    Ball screws with a built-in anti-dust wiper system and splash-proof design, it doesn’t need flexible covers.

    New built-in backlashless gear system without brake lining pads, without changing magnetic powder for the brake system, decreases maintenance costs significantly.

    SMART OPERATION

    EASIER OPERATION

    7" wide touch screen control is for easier operation, monitoring & error codes history monitoring.

    USER-ORIENTED OPERATION

    Variable vise pressure can be easily adjusted & monitored in front of the machine.

    LESS OPERATION TIME

    Detecting material size automatically with less cycle time, less operation time, and avoiding operating errors.

    TRIM-CUT ON/OFF

    Trim cut ON/OFF function is available to choose from for different requirements.

    HIGH RIGIDITY

    High RELIABILITY

    Unique gear head design with a built-in backlashless gear system ensures smooth sawing, high efficiency, less noise, lower power consumption, precision, faster sawing, and longer circular saw blade service life.

    HIGH ACCURACY

    Fiber photo sensors detect the bar end of different kinds of materials such as extruded bars, forging bars, etc., more accurately than before.

    UP-TO-DATE DESIGN

    UP-TO-DATE MODULE

    Modularized oil mist spraying mode can be set as:

    1. Intermittent spraying.
    2. Continuously spraying for optimized mist oil consumption.

    When the cutting oil is not enough, then error signal will pop out to notify the operator to refill it.

    SMART INSTALLATION

    Up-to-date POD program installation by USB port is for easier program uploading, downloading, and editing.

    ECO DESIGN

    An Independent, compact oil tank design could run the machine with good performance, achieving environment-friendly, energy-saving purposes.

  • Standard Equipment
    No.PartsPieces
    1.Saw blade1 pc
    2.Wire brush2 pcs
    3.Working lamp1 set
    4.Tools with tool box1 set
    5.Instruction manual1 copy
  • Select Equipment
    1. Auto chip conveyor.
    2. Long cut-off pieces unloading table.
    3. Bar stock reservoir and loader.
    4. Chain belt magazine table for flat work-piece.