H-Series Double Column Type
◆ A completely automatic cutting cycle synchronized with an automatic bar-feed mechanism and stock clamping action provide accurate repetitive cutting.
◆ An excellent blade tensioning system and guides keep the blade aligned and under constant load at all times.
◆ A hydraulically controlled cutting feed maintains a constant cutting rate regardless of the workpiece cross section.
◆ A power-driven brush continually flushed by a cutting fluid spout keeps the blade and saw guides free of chips for smoother cutting.
◆ A quick approach and normal feed rate selector are equipped to cause the blade to quickly descend into position.
◆ A "Cutting Piece Counter"-is used to preset the number of cuts required during automatic operation.
◆ Two hydraulically operated vises, one a fixed front vise, the other an inflexible traveling vise in the rear side.
◆ The hydraulically operated nesting fixture is designed for high production multiple sawing of stacked bars, small rounds, and tubes. The fixture contains vertical cylinders mounted on the index and front vises. It holds stacked work firmly to prevent vibration.
◆ A cutting length presetting device is built into the saw to preset the required cutting length of a workpiece during automatic operation. It is simply operated by means of a read-out digital device.
◆ Multiple stroke Preset Counter: when a cutting length of more than 16 is required, the number of strokes can be preset on this counter. The counter is capable of being set to a maximum of nine strokes 144" (3,600 mm ).
SAFETY DESIGN- Every MEGA Band Saw is factory equipped with :
- Safety and thermal overload switches.
- Well guarded blades and wheel covers.
- Saw Blade shuts off automatically when cutting is complete.
- Low voltage & zero voltage controls.
- A blade breakage sensor/motion detector provides automatic shutoff.
WITH DIFFERENT CONTROL SYSTEMS AS PICTURES DEMONSTRATED BELOW ARE OPTIONAL AVAILABLE PLEASE ASK FOR FULL DETAILS OF A MODEL SUITED TO YOUR PARTICULAR CUTTING REQUIREMENTS
1.STANDARD CUTTING FEEDRETE SYSTEM
2.AMPLIFYING VALVE FOR AUTO ADJUSTING OPTIMIZED CUTTING FEEDRATE SYSTEM (OPTIONAL AVAILABLE ON ALL MODELS)