TWO DIES ROLLING
The Mega's economy thread/profile forming machine at the moment equipped with swivelable roller shafts. Which ensures optimum capacity and use in making threads and axially parallel profiles in the through-feed process. However, short cylindrical parts (especially thread pins) can also be rolled in the through-feed process. For this special through-feed process, automatic feed of the work is necessary.
This machine can also be used in the in-feed process with parallel die axes, the length of the profile to be rolled depends on the width of the rolling dies, there is no axial movement of the workpiece.
Range of Thread
Range of length
Range of length
Under Φ35: Free / From Φ35~Φ50: within 300L
5-60 RPM(Standard) / 50-105 RPM(Optional)
Distance of Dies Spindle
Max. Rolling Pressure
Height from Floor to Spindle Center
Floor Space Required
1230L x 1373W mm
1.Swivelable roller shafts at full utilization of the rolling force,short working cycles by increasing the forward-return speed.
2.Increase driving power, optional use in slow motion/normal and rapid advance by hydraulic multi-circuit system.
3.Increase in the efficiency and improvement of the utilization of power by gears on parallel axes and drive by universal shafts.
4.Free passage between the roller shafts for the manufacture of any length of profiles.
- Standard equipment
1.Control panel (with stepless variable speed for rolling die spindles) that provides easier operation and smooth rolling for different kinds of thread/gear forms and materials
2.Powerful hydraulic system and easy adjustment for rolling different kinds of jobs
3.Quick thread pitch matching device
4.Working area light
- Select Equipment
1.Movable Centering Work Rest Device
2.Standard Centering Work Rest Device
3.Bush Type Work Rest Device
4.Gear/spline shaft rolling device
5.Taylor made bar feed system for different applications
6.12-step-speed gear change system